hAP ac lite
The hAP ac lite is a Dual-concurrent Access Point, that provides Wifi coverage for 2.4GHz and 5GHz frequencies at the same time.
Unit is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.
We have two versions available - RB952Ui-5ac2nD (International) and RB952Ui-5ac2nD-US (USA). RB952Ui-5ac2nD-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. RB952Ui-5ac2nD (International) supports 2412-2484MHz and 5150MHz - 5875MHz range.
Προδιαγραφές
Product code |
RB952Ui-5ac2nD |
CPU nominal frequency |
650 MHz |
CPU core count |
1 |
Size of RAM |
64 MB |
10/100 Ethernet ports |
5 |
Wireless chip model |
QCA-9887 |
Wireless standards |
802.11a/n/ac |
Secondary wireless standards |
802.11b/g/n |
Secondary wireless chip model |
QCA9531 |
Number of USB ports |
1 |
Power Jack |
1 |
Supported input voltage |
10 V - 30 V |
PoE in |
Yes |
PoE out |
Yes |
Dimensions |
113 x 89 x 28mm |
Operating System |
RouterOS |
Tested ambient temperature |
-30 + 70 C |
License level |
4 |
Antenna gain DBI |
2 |
CPU |
QCA9531 |
Max Power consumption |
8W |
USB Power Reset |
Yes |
USB slot type |
USB type A |
Number of chains |
1 |
Storage type |
FLASH |
Storage size |
16 MB |
Προδιαγραφές Ασύρματου
2.4 GHz |
|
Transmit power (dBm) |
Receive Sensitivity |
Transmit power (mW) |
1MBit/s |
22 |
-96 |
158 |
11MBit/s |
22 |
-89 |
158 |
6MBit/s |
20 |
-93 |
100 |
54MBit/s |
18 |
-74 |
63 |
MCS0 |
20 |
-93 |
100 |
MCS7 |
16 |
-71 |
40 |
5 GHz |
|
Transmit power (dBm) |
Receive Sensitivity |
Transmit power (mW) |
6MBit/s |
23 |
-93 |
200 |
54MBit/s |
20 |
-75 |
100 |
MCS0 |
23 |
-93 |
200 |
MCS7 |
19 |
-71 |
79 |
MCS9 |
16 |
-63 |
40 |
wireless parameters may be limited in software, depending on your local regulatory limitations
Τα αποτελέσματα των δοκιμών απόδοσης
RB952Ui-5ac2nD |
QCA9531 (650Mhz) 100M all port test |
Mode |
Configuration |
1518 byte |
512 byte |
64 byte |
kpps |
Mbps |
kpps |
Mbps |
kpps |
Mbps |
Bridging |
none (fast path) |
40.6 |
493.0 |
117.4 |
480.9 |
217.0 |
111.1 |
Bridging |
25 bridge filter rules |
40.6 |
493.0 |
70.1 |
287.1 |
70.9 |
36.3 |
Routing |
none (fast path) |
40.6 |
493.0 |
117.4 |
480.9 |
200.8 |
102.8 |
Routing |
25 simple queues |
40.6 |
493.0 |
79.6 |
326.0 |
90.8 |
46.5 |
Routing |
25 ip filter rules |
40.6 |
493.0 |
42.2 |
172.8 |
43.2 |
22.1 |
- All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
- Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
- Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
- Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results